top of page
Secure Anchor Systems - _0008_Corrugator360 Anchor.jpg

Roof Anchors

Tried, tested and true.

All of our anchors are patented designs. All of them have been tested to destruction
(the roof components give way before the anchor does). 

All of our anchors comply with and meet the 15kN benchmark set out in AS1891.4 (2009). That’s why so many specifiers in Australia, NZ and the USA are now turning to Secure Anchor Systems.

Economical? You bet.

The simplicity and sturdiness of the compact design saves you money.
Best of all, you don’t pay for ‘experts’ to fit them; most can be installed in as little as a few minutes by any competent tradesman with a cordless drill.

Designed for Australian conditions.

With demanding OH&S requirements, it was time for a fresh look at roof anchors. Designed in Australia to satisfy Australian architects, designers, engineers and contractors.

Secure Anchor Systems - _0004_Corrugator Anchor.jpg

LP06 Corrugator Anchor

The Corrugator™ LP06 roof anchor. A surface mounted stainless steel roof anchor to suit standard corrugated iron roof sheeting.

Download Tech Sheet

​

Secure Anchor Systems - _0012_SD09-Spandek Anchor.jpg

SD09 SpanDek Anchor

A surface mounted stainless steel roof anchor to suit Lysaght Spandek®. 

Download Tech Sheet

Secure Anchor Systems - _0008_Corrugator360 Anchor.jpg

Corrugator360 Anchor

The Corrugator™ 360 degree corrugated iron fall arrest roof anchor. A surface mounted stainless steel roof anchor to suit standard corrugated iron roof sheeting.

Download Tech Sheet

Secure Anchor Systems - _0006_TA09 Tile Shingle Anchor_.jpg

TA09 Tile/Shingle Anchor

A surface mounted stainless steel roof anchor to suit a appropriate clay and concrete tiles, various forms of slate and faux slate and timber and asphalt shingle roofing.

Download Tech Sheet

Secure Anchor Systems - _0011_TD06 TrimDek Anchor.jpg

TD06 TrimDek Anchor

The TD06 360° fall arrest roof anchor to suit certain roof profiles such as Trimdek®. 

Download Tech Sheet

​

​

 

Secure Anchor Systems - _0009_RD08 RoofDek Anchor.jpg

RD08 Flat Pan Anchor 

A surface mounted stainless steel roof anchor to suit Lysaght Kliplok 700® series trapezoidal ribbed roof sheeting.

Download Tech Sheet

RD08 RoofDek Insulated Anchor.jpg

RD08 Insulated Panel

A surface mounted stainless steel roof anchor to suit insulated sandwich panel roof sheeting.

Download Tech Sheet

​

​

​

TV09-Train-Vehicle-Anchor-0656-2.jpg

TV09 Train-Vehicle Anchor

A surface mounted stainless steel ‘D’ ring anchor to suit suitable flat substrates such as train/vehicle roofs and steel columns.

Download Tech Sheet

RA20-DSC_0441-2.jpg

RA20 Over Ridge

Tile/Slate/Shingle ridge anchor that has an attachment point on either side of the ridge. Can be fixed to either onto a minimum 12 mm plywood roof deck or directly to a common rafter.

Download Tech Sheet

CA-13 (2).JPG

CA13 Container Anchor

A surface mounted stainless steel roof anchor to suit shipping containers, providing height safety in fall arrest and restraint applications. 

Download Tech Sheet

bottom of page